As were now being encouraged to blog our projects here goes...
A complete recap of my project thread.
Car started out like this over 4 1/2 years ago
First decision was to either go for the engine first or make the chassis capable of taking the VTS power. I had just sourced a VTS engine with only 56k on it, single plug ecu so was perfect for my car. Even with that temptation i decided the best way to go about things was to prepare the chassis for the new engine first.
I set about putting a VTS disk beam on the rear, but then found out it was roggered, so decided to investigate how to refurb it
Billies were added all round
New drop links and bushes all round
Then it would be rude not to install bigger brakes and braided hoses while i was at it!
That was stage one complete,
I then went to an RR day in November and she did me proud making 83bhp @ fly with 100k on the clock and just induction kit and de-cat!
 »Read More«
View/Add Comments ..... |
Powered by
BlogsPlus by ise ©
snowslider.net - upgraded by Phoenix @
nukebiz.com
Based on the original DragonFlyCMS Blog module from Trevor
XMLSYNDICATE
